When it comes to construction projects, it can be a little difficult to keep track of all the things that are going on.  Quality assurance is your top priority, but that can only be achieved if you have a plan in place and a great Residential Architect you can fully trust with your plans. At times, it might feel like a project is taking too long, but even if that is the case, don’t rush things.

Once the house is complete, you won’t be able to make any changes to it. So, take your time and plan the project thoroughly so that your house turns out exactly the way you had dreamed it to be.

Following are seven steps that will help you with your residential construction planning:

Select a Design Professional

How many rooms do you want in the house?

Do you want an open kitchen floor plan?

Do you want the master bathroom to be spacious so that you can add a luxurious touch to it?

Do you want a private den in the basement or a hidden room as your office?

This is what a design professional will help you decide. Choosing a designer is an essential step because it is the bases of your planning process. Have an in-person meeting with several designers and then choose one based on who was more open to incorporating your ideas into the design.

Create a Plan

Once you have chosen the designer, it’s time to create the plan. This is a blueprint that will outline every room in detail. That’s just the basic construction. Some architects know everything, from the structural work to electrical planning and plumbing. Hire one that wears many hats, so that you will have to deal with one person only.

Get the Permits

If your plan involves a specific construction part that won’t be approved by the home owner’s association or a higher authority, then make sure to get the permit for it. It might take a few days or even a month for your appeal to get approved, so do a little pre-planning for the permits.

Interview Contractors

You have the blueprint and the permits for your house, and now it’s time to hire a contractor. Present the schematic design to the contractor and get the construction estimate of time and cost. Interview different contracts and then compare the cost and their expertise. You want to hire someone who will get the job done in a reasonable amount of time and under your budget.

Assure Quality Construction

Hiring a contractor is not just about getting a team that will work on your house. You have to make sure that the equipment and attachment hire they are using is sturdy. You don’t want any mishaps occurring on the site because they will only delay the completion.

Construction Supervision

Just because you hired a contractor does not mean that your job is done. When resources are unavailable, the contractor has to make an urgent decision, which might involve going for cheaper quality sediment or woodwork. Hire a trusted consultant advisor for this job and take a personal interest in every step of the process to make sure that everything is proceeding according to the plan.

Handover – Ask for the Owner’s Manual

If you have included some SMART options in the construction, do ask the designer and contractor to provide you with detailed instructions so that you know how everything operates. Remember — the most important part is the design. If that is done properly, the contractors will have no trouble in completing the project.

Your house is ready and now, it’s time to shop!

Sharing is caring!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.