Buying only one fixture is not enough. You need to consider the Federal Standard Mandate which requires 1.6 Gallons per Flush for toilets, and 1.0 for Urinals. However, the term low flow can mean anything less than what the mandate says.

Labeling can be vague from time to time. There is a strong trend towards saving water. To achieve this, people are asking for 0.35 gallons per minute. You can get a unit that uses 0.5 GPM or even less. This raises a question about the effectiveness of low flow fixtures, especially when you

Low-Flush Toilets and Water Conservation

Unless you have an older house with fixtures that haven’t been replaced since before the 1990s, your home probably has low-flush toilets that use 1.6 gallons or less per flush. In 1992, the United States Energy Policy Act made it illegal for new toilets to make use of more than 1.5 gallons of water for each flush. These toilets certainly do use less flow of water and cut down on water bills.

However, one of the unintended consequences of the move toward more energy-efficient fixtures is that many toilets have reduced flushing power. When you see a large number of materials in the bowl, having an unsuccessful pressure of water is simply intolerable. It’s never any fun to get a clog that requires you to have to get the plunger out, and sometimes you may even have to call a plumber if you’re unable to get it unclogged yourself.

What Options You Have?

There are several different possible situations that your low flow toilet might encounter on the way to a potential clog. Understanding all these scenarios is important to give yourself the best chance of preventing your toilet from blockage. Amount of water in the flush is insufficient to wash down all solids completely

Clog prevention

If your toilet has a dual-flush mode, be sure that you hold down the handle until the water has completely finished draining from the bowl in order to make sure your toilet does a full flush when there are solids in the bowl.

Get a toilet with a dual tank model that uses the help of air pressure (rather than just gravity) to empty the bowl.

Workaround: When you know that the number of solids in the bowl is going to pose a problem for a potential clog, do this: Before you flush the toilet, fill a mop bucket with water. Press the handle to flush the toilet and then pour the entire mop bucket of water down the toilet bowl while it is flushing. This will give your toilet the little bit of extra assistance that it needs to flush correctly. (Only do this when you absolutely need to, not on every flush. Make sure that you are not dropping rappers or bags in the commode because in the future it will mess you with a big clogging problem. Care is the best solution rather calling toilet services and paying a big fortune to them. For more Visit

Sharing is caring!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.